#
# Act like a PPTP server allowing 3 clients to connect.
#
# Renaud Waldura, August 2000
#

pptp0:
	set link type pptp

	# this is a PPTP server only
	#set pptp mode passive
	set pptp yes incoming
	set pptp no originate

	# the PPTP interface address
	set pptp self 270.283.113.190

	# CHAP authenticated
	set link yes chap
	set link no pap

	# protocol compression
	set link accept acfcomp protocomp
	set link keep-alive 10 75

	# for Windows NT clients?
	#set link enable no-orig-auth

pptp1:
	set link type pptp

	# this is a PPTP server only
	#set pptp mode passive
	set pptp yes incoming
	set pptp no originate

	# the PPTP interface address
	set pptp self 270.283.113.190

	# CHAP authenticated
	set link yes chap
	set link no pap

	# protocol compression
	set link accept acfcomp protocomp
	set link keep-alive 10 75

	# for Windows NT clients?
	#set link enable no-orig-auth

pptp2:
	set link type pptp

	# this is a PPTP server only
	#set pptp mode passive
	set pptp yes incoming
	set pptp no originate

	# the PPTP interface address
	set pptp self 270.283.113.190

	# CHAP authenticated
	set link yes chap
	set link no pap

	# protocol compression
	set link accept acfcomp protocomp
	set link keep-alive 10 75

	# for Windows NT clients?
	#set link enable no-orig-auth